Rigids, Trailers

EN 12642-XL: The Ultimate Guide to Load Restraint

While there is no law which states that bodywork should be EN 12642-XL rated, Lawrence David’s is.

Since 2004, Lawrence David has invested in the design and dynamic testing of both the body superstructure and the curtains to EN 12642-XL standard. It is a standard feature on all new Pillar-Less Curtainsider trailers , Pillar-Less Sliding Roof trailers and our entire range of Rigid Curtainsiders (including the bulkheads!)

In line with DOE Safety of Loads, any vehicle over 3.5t must contain and restrain the load, or, run the risk of being stopped at the roadside and issued a PG9 or Prohibition Notice if the load is not a ‘Positive Fit’ or correctly restrained. A standard curtain sided vehicle or trailer body wouldn’t usually give enough load security – the body and curtains only provide weather protection for the load – you should still secure the goods as if you were using a flatbed vehicle.

Follow this link for useful information and guidelines from the HSE: https://www.hse.gov.uk/research/rrpdf/rr662.pdf

EN 12642-XL is a build standard for trailer bodies and it sets out two main types that can be built:

• Standard Body Types (L)
• Reinforced Body Types (XL)

Vehicles and trailer bodies do not have to built to XL standard by law, but an XL body is a useful part of any load securing system and provides extra peace of mind. Our range of Curtainsider bodies and trailers are EN 12642-XL compliant as standard. In the event you’ve purchased a Lawrence David body without EN 12642-XL specification, we can uprate the body for little to no cost compared to our competitors.

It is evident EN 12642-XL and load security are high on the DVSA list of issues to combat. They will be looking for vehicles operated on the roads that are NOT clearly marked as XL rated and will stop them to check for:

1. Certification
2. EN 12642-XL Conformity
3. ‘Positive Fit’

So why run the risk of non-compliance?

Next time you’re researching a trailer manufacturer, give Lawrence David a call first. We are specialists in trailer and rigid bodywork, one of the oldest manufacturers in the country and we can advise you of the best solution to support your business, or design you a new one.

We have the experience; we have the expertise and we have the vision.

This is why we are the strength behind the haulage industry.

Contact us today.

Related Articles

The future is electric: Electric semi-trailers and rigids
Rigids | Trailers
A Guide to Trailer Safety
Repairs | Servicing | Trailers
12 Facts About Trailer Manufacturing
Trailers

WARRANTY & RETURNS

Returns Policy
  • In the event that you would like to return any parts to us, you must notify us within 14 calendar days of your purchase. Failure to do this will result in your returns claim being rejected.
  • In the unlikely situation that you have been sent faulty or incorrect parts, again you must notify us within 14 calendar days of your purchase so that we can arrange collection of your parts at our cost. We will then organise a refund or replacement parts dependant on your preference.
  • Non-account refunds will be issued back to the original method of payment and will be processed no later than 14 calendar days after receiving your return.
  • If you have ordered incorrect parts or you would like to return any parts for any other reason than stated above, it will be your responsibility to organise the return of these parts at your own cost. Contact us if you wold like a quote for a collection.
  • All returned parts MUST be in good, re-saleable condition.
  • Responsibility of all parts will remain with you until all parts are received and signed for by a Lawrence David member of staff.
How do I return my parts?
  1. Please call us beforehand to notify us of any parts that you would like to return.
  2. Ensure that any returned items are sent via recorded delivery to obtain a proof of delivery should it be required.
  3. Ensure that the parcel(s) containing your returned parts are clearly marked with your company name and your order reference to ensure a speedy turnaround. A copy of the original delivery note with the goods would be ideal.
  4. Returns delivery address – Lawrence David, Multi Parts Division, Woodston Point, Shrewsbury Avenue, Peterborough, PE2 7LB
Warranty returns
  • Lawrence David offer a standard 1 year warranty on genuine LD parts. We do not offer direct warranties for any other parts offered on this site. However, most genuine parts offered do come with manufacturer warranties and we are happy to help liaise with the manufacturer of the part should you need to make a warranty claim.
  • Please note that Lawrence David will not cover any labour costs incurred under warranty. However, if the manufacturer is happy to accept liability under their warranty policy and is happy to reimburse any monies, we will duly pass this on.
  • Should you wish to discuss a warranty return then please do not hesitate to call us.